Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
See the difference
Before
After
Before
After
Before
AfterHow Much Does Air Duct Cleaning Cost in Mill Basin?
Air duct cleaning in Mill Basin typically costs $350 to $650 for a standard single-zone home, with most one- and two-story houses landing near the middle of that range. Larger homes and systems with multiple heating or cooling zones run $650 to $1,100. If your ductwork needs repairs or sealing on top of cleaning, expect to budget upward from there because that’s separate work with its own labor line.
Those figures cover mechanical agitation and high-powered extraction with professional equipment, not a shop-vac pass and a wave of a wand. We come to every Mill Basin job with Rotobrush rotary-brush systems and Nikro equipment, which is the standard HVAC contractors trust for residential ductwork. The written estimate you get before we start sets the final price. Call (866) 665-7533 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm.
Key Takeaways
- Standard Mill Basin duct cleaning runs $350 to $650; larger, multi-zone homes cost $650 to $1,100.
- Duct repair and sealing is separate work and priced per job by the written estimate.
- Bungalows and brick colonials in Mill Basin often have decades-old ductwork that hides gaps and loose joints.
- Rotobrush and Nikro equipment does the extraction work a consumer vacuum can’t reach.
- Estimates are free. Call (866) 665-7533 to schedule.
Air Duct Cleaning Cost Breakdown (2026)
Here’s how the pieces of a duct cleaning job break down for a typical Mill Basin home. These are typical ranges for the Mill Basin market. Your written estimate will confirm the exact number once we see your system.
| Service component | Typical range in Mill Basin | What it covers |
|---|---|---|
| Supply and return duct cleaning, single-zone home | $350 – $650 | Rotary-brush agitation and high-volume extraction on all main runs, trunks, and returns |
| Multi-zone or larger home duct cleaning | $650 – $1,100 | Same process across two or more systems or a larger footprint |
| Register and grille cleaning (per unit) | $8 – $20 | Removal, wash, and reinstall of individual registers and return grilles |
| Duct repair and sealing | Estimate per job | Patching tears, sealing loose joints, reconnecting disconnected runs |
| Air quality and sanitizing treatment | Estimate per job | Aprilaire, Honeywell, Abatement Technologies products; optional UV treatment and negative-air containment |
| Dryer vent cleaning | $120 – $250 | Full-length vent and lint-trap-to-exterior-vent cleaning |
| HVAC cleaning (coils, blower, cabinet) | $150 – $400 | Cleaning of the air handler components that feed the duct system |
A few things move the price up or down. Larger footprints mean more linear feet of ductwork and more registers to pull, clean, and reinstall. A system with more than one heating or cooling zone means more trunks and more return paths. Heavy contamination, like a system that hasn’t been touched in years or has visible debris and nesting material, means longer cleaning time per run. Repair and sealing adds a second scope of work entirely. And sanitizing or filtration treatment is an optional layer on top of cleaning, priced by what your system needs. All of these are quoted in the written estimate before any work starts.
If you’re comparing us against other duct cleaners in the borough, the flat comparison guide is on the Air Duct Cleaning Bedford-Stuyvesant page.
What Affects Air Duct Cleaning Pricing in Mill Basin
Mill Basin is a specific kind of neighborhood, and the housing stock shapes the quote. The area was built up largely in the postwar decades with a mix of one- and two-story homes, including the brick colonials and attached houses that line the streets closer to Flatbush Avenue and the canals. Many of those homes still have the original sheet-metal trunk-and-branch ductwork with short flex runs to the registers. That older ductwork is a pricing factor in itself: it’s rare to open it up and find no gaps, loose joints, or separated runs. Here’s what actually drives the number up or down.
- Square footage and system size. A 1,400-square-foot bungalow with one furnace is a different job from a 2,600-square-foot home with two systems. More duct means more brush passes and more extraction time.
- Number of registers and returns. Every register has to be pulled, cleaned, and reinstalled. A house with a dozen supply registers and two big returns costs more than one with six.
- Duct material and condition. Flexible duct runs that have collapsed, torn, or sagged take longer to work through, and sometimes need repair rather than cleaning. Rigid sheet metal is more straightforward, but seam gaps are common in older installs and get flagged during the walkthrough.
- Access difficulty. Crawlspaces, tight mechanical closets, and drops behind finished basement ceilings all add labor. During a typical job, the technician has to physically reach every trunk to agitate it, and sometimes that means working in a tight corner.
- Contamination level. A system that’s been serviced recently needs less time than one that’s been neglected for a decade. Pet hair, drywall dust from a past renovation, and debris that’s settled into return trunks all add extraction cycles.
- Add-on services. Dryer vent cleaning, HVAC cleaning, duct repair and sealing, and sanitizing are each priced separately, and bundling them into one visit saves you the second dispatch and the second walkthrough.
One local note that’s not about price but worth knowing: many homes on the blocks near Mill Basin Park and along the Belt Parkway corridor have been through additions, finished basements, or reconfigurations over the years. Ductwork that was moved or extended during those projects is often where gaps and leaks hide. That’s the kind of thing we check during the walkthrough, because cleaning a duct system with disconnected runs only cleans part of your house.
How to Save on Air Duct Cleaning
Duct cleaning isn’t a category where the lowest quote is the right answer, but there are real ways to keep the price down without cutting the process short.
- Get a written estimate before you schedule. The number shouldn’t change once a technician is on-site unless the scope was misdescribed over the phone. Free estimates keep that risk on our side, not yours. Call (866) 665-7533.
- Bundle the obvious additions in one visit. If your dryer vent hasn’t been cleaned recently, or your air handler needs cleaning, doing both during the duct cleaning visit means one trip. Dryer vents are a fire risk on their own, and most duct-only cleaners skip them or subcontract them out.
- Fix duct leaks while the system is open. Duct repair and sealing is priced as its own job, but doing it while the ducts are being cleaned saves the second visit. Sealing loose joints also stops the next round of dirt from being pulled into the ducts, so it pays back over time.
- Skip sanitizing if your ducts are healthy. Sanitizing is a useful treatment for musty or damp systems, or after certain types of renovation work. If the ducts are just dusty, cleaning alone is often enough. Ask during the estimate.
- Deal with sources of debris, not just the symptom. If your filter housing has gaps, or the return grille sits right where a pet sleeps, that’s where the dirt is coming from. Fixing that is cheaper than cleaning twice.
- Be skeptical of a quote that’s dramatically lower than the rest. A machine that can’t agitate the duct walls isn’t cleaning; it’s just extracting what’s loose. The equipment matters more than the price tag when you’re the one breathing the air.
What’s Included in a Standard Mill Basin Duct Cleaning
A standard job includes cleaning every supply and return duct run, all trunks, and every register and grille. The process is mechanical, not just suction: a Rotobrush rotary brush agitates the interior duct walls to break up loose debris and caked-on dust, and the Nikro vacuum system pulls it out at high volume. We do a walkthrough first to scope the system, and we seal off the work area to keep dust out of the rest of the house. At the end of the job, you get a summary of what we found, including any duct concerns that need to be addressed separately.
What’s not included by default: duct repair and sealing, HVAC cleaning, sanitizing treatments, and dryer vent cleaning. Each is a separate line item in the written estimate, and each can be added to the same visit. If you’re a property manager handling multiple units, we can scope your building in one estimate instead of per door.
Can I Clean My Own Ducts to Save Money?
You can handle light maintenance and see real results for the price of a vacuum, but a full duct cleaning is a different job. Consumer vacuums and the tools sold for homeowner use don’t have the airflow or the mechanical agitation to dislodge caked dust from duct walls, and they can’t reach deep into trunk runs. The part homeowners can absolutely do: change the filter on schedule, keep return grilles clean, vacuum registers, and keep the area around the air handler clear. If your system has visible debris, nesting material, mold growth, or a musty smell that doesn’t clear after a filter change, that’s the point to bring in professional equipment and an experienced technician. Getting the job done with Rotobrush and Nikro gear is a one-visit task for a trained crew and a multi-weekend DIY project for anyone else, usually with worse results.
Should I Clean My Ducts or Repair Them First?
Repair and sealing usually comes after cleaning, not before. Cleaning first clears out the debris and lets the technician see damage to the duct walls that was hidden under the dust. Then repair and sealing makes sense because the duct is clean and the seal will hold. In a small number of cases, a duct is so damaged structurally that it has to be repaired or replaced before cleaning is safe, and a technician will flag that during the walkthrough. If you suspect leaks or disconnected runs, it’s worth telling the technician on the call so the estimate covers both scopes.
How Long Does Duct Cleaning Take in Mill Basin?
A typical single-zone home in Mill Basin takes roughly 3 to 5 hours from walkthrough to wrap-up. Larger homes or multi-zone systems run 5 to 8 hours. Add-on services like HVAC cleaning or dryer vent cleaning extend the visit. Repair and sealing, when included, is scoped by the estimate and can add time depending on how many joints and runs need work. Same-day service is often possible when we have an opening, so it’s worth asking when you call. Call (866) 665-7533. We answer 24/7.
Does Sanitizing Affect the Price of a Duct Cleaning?
Yes, sanitizing is a separate line item. Most Mill Basin homeowners only need it when a specific problem calls for it, like a musty smell, a damp basement, mold concern, or a recent renovation that pushed construction dust through the system. We use Aprilaire, Honeywell, and Abatement Technologies products, including negative-air containment for the situations that call for it, which is the kind of equipment usually reserved for remediation-grade work. The estimate will spell out exactly what’s included and why it’s being recommended. If you don’t need it, we’ll tell you.
Dryer Vent Cleaning: A Separate Line That Matters
A dryer vent cleaning runs $120 to $250 in Mill Basin, depending on vent length and access. It’s a separate job from duct cleaning and, if you’re getting both done, it makes sense to schedule them together. Lint buildup inside a dryer vent is a leading cause of residential fires, and most duct-only cleaners either skip it or subcontract it out. We don’t. Cleaning your dryer vent to full length, from the dryer connection to the exterior vent, is one of the five core services we handle, along with duct cleaning, HVAC cleaning, duct repair and sealing, and air quality and sanitizing. If you’re going to have the truck at the house anyway, get the dryer vent done at the same time.
FAQs – Air Duct Cleaning Cost in Mill Basin
How much does air duct cleaning cost in Mill Basin? Most Mill Basin homes pay $350 to $650 for standard duct cleaning, and $650 to $1,100 for larger or multi-zone systems. Add-on services are separate. Call (866) 665-7533 for an exact quote. Estimates are free.
Are estimates free? Yes, estimates are free and the price is set per job in writing before any work begins. Call (866) 665-7533 to schedule one.
Is it cheaper to clean or repair ductwork? Cleaning is usually cheaper than repair, but it’s not either/or. Cleaning the ducts first is often what makes repair possible, because it clears out the debris covering the damage. Repair and sealing is priced by the estimate, and on a cleaner, sealed system, you get better performance out of the same heating and cooling equipment. Call (866) 665-7533 to get both scoped together.
Can you come today? Often, yes. Same-day service depends on the schedule and the scope of the job. Call (866) 665-7533. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Do you offer same-day dryer vent cleaning too? When it’s scheduled with duct cleaning, dryer vent cleaning can often be done on the same visit, and there’s no extra charge for a second trip. Call (866) 665-7533 to add it to the estimate.
Why does the price vary so much between quotes? The gap is usually equipment and scope. A shop-vac setup and a Rotobrush rotary-brush system are not the same job, and the second one costs more because it actually agitates duct walls. A quote that doesn’t mention repair or sealing, or that’s much lower than the rest, is usually leaving things out. Call (866) 665-7533 for a written estimate that spells out what’s included.
Does the price depend on the type of ductwork? Yes. Rigid sheet metal and flexible duct work differently and take different time and tools. Older homes in Mill Basin commonly have rigid trunk-and-branch systems with flex from the trunk to the register. The walkthrough tells us what we’re working with. Call (866) 665-7533 for a scoped estimate.
Get Your Free Duct Cleaning Estimate in Mill Basin
Air duct cleaning in Mill Basin runs $350 to $650 for standard homes and $650 to $1,100 for larger or multi-zone systems, and every job is scoped with a written estimate before we start. We use professional-grade Rotobrush and Nikro equipment, we handle duct repair and sealing in-house, and we cover the full air pathway with five services under one provider: duct cleaning, dryer vent cleaning, HVAC cleaning, duct repair and sealing, and air quality and sanitizing. Our technicians have up to 15 years of experience. Call (866) 665-7533 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Mill Basin market as of 2026. Air Duct Cleaning Bedford-Stuyvesant offers free estimates – call (866) 665-7533.
What Our Customers Say
"My wife's allergies had been bad in this house since we moved in. It's been two months since they did the ducts and it's noticeably better. Not a miracle, but real."
- Ryan Bennett"Cheapest of the three quotes I got, and I was nervous about that. Turned out the other two were just padding. Work has been solid."
- Brian Reed"Ran a negative air machine on the whole system rather than the shop vac on a stick that the cheap outfit down the road uses. Showed me the before and after photos from inside the trunk line and it was genuinely disgusting."
- Neil Barrett